How to Create an Anti-Smoking Ad Concept with Photoshop

Today we will create a really cool anti-smoking concept design in Photoshop using only a few stock photo and some creative outside-the-box thinking. We will go through some interesting techniques you will definitely find useful, as well as some composition ideas.
Following this tutorial will not only learn how but also why a specific command or set of commands are used. The same goes for the composition.

Difficulty: Advanced
Completion time: 3-4 hours
Tools: Photoshop CS3

The Best Deals For Digital Design Assets - Learn More>>

Woman by Marcus J. Ranum
Cigarette ash by
Smoke brushes by revn89
Concrete texture by DesignTNT

Final Image Preview


Create a new document of 2300 x 1600 px in RGB color mode at 72 dpi with “Transparent” background setting. If you intend to print it, set it at 300 dpi.


Open the “model” picture. Now it’s time we remove the background and copy the model. In the Channels window, click the channels and see which one give the image the most contrast. In this case, it’s the “Red” channel. Right-click it and select “Duplicate Channel” and hit OK.

Note: The channel with the most contrast varies from picture to picture, it is up to you to decide which.


Select the “Red copy” channel. Now we must bring the channel to a max contrast between the background and the woman’s outline.

Go to Image > Adjustments > Levels (CTRL+L) and adjust the sliders like in the image below. This is a simple way to increase the contrast a bit.


Grab the Dodge Tool (O), set it on Midtones with a 37% Exposure and lighten the areas around the woman’s hair and body.


Grab the Path Tool (P), set it on Paths and trace the bottom area of the woman’s body. We need to remove the shadows; we will create our own.


Right-click >  Make Selection and hit OK. Grab the Brush Tool (B), hit D, then X (D sets foreground and background colors to black and white; X switches them) and paint the entire selection.


Go to Select > Deselect (CTRL+D). Grab the Dodge Tool (O) and lighten the rest of the background.


Grab the Brush Tool (B) again, hit X and paint over the woman; cover it entirely with black. Go to Image > Adjustments > Invert (CTRL+I), and then CTRL+click the channel’s thumb and switch to Layers palette. Click the layer thumb and copy the selection (CTRL+C).


Go back to our document (CTRL+Tab) and paste it. Hit CTRL+T to enter Free Transform mode, center it, double-click the layer’s name and rename it to “woman base”.


CTRL+click the layer thumb to load a selection, then go to Select > Refine Edge. Use the settings below and hit OK. Hit CTRL+D (Select > Deselect) to deselect. Grab the Spot Healing Brush Tool (J) and click on any skin imperfections to clean them up.

We want a contrast between the smoothness of the skin and the grunginess of the cigar ash, that’s why we need a perfect skin.


Open the “Cigarette ash” picture. Go to Select > Color Range and click the red background. Use the setting below for “Fuzziness. Hit OK.


The selection is not very precise, but it does most of the work. Hit Q to enter Quick Mask mode, and then grab the Brush Tool (B), set Hardness to 100% and paint over the remaining additional areas. Use “[“ and “]” to adjust the brush size.


Hit Q again to exit Quick Mask mode and copy the selection (CTRL+C). Go back to our document (CTRL+Tab) and paste it. Go to Image > Adjustments > Desaturate (CTRL+SHIFT+U) to desaturate the image.

Open the “concrete” picture. Grab the Clone Stamp Tool (S), set the tip to a soft brush, ALT+click in a cleaner area (shown below) and click over the circled spot.

Hit CTRL+SHIFT+U to desaturate it, then CTRL+L and use the settings below. We will use this as background.


Name this layer “ash”  and turn off its visibility. Now we should decide the areas where we want “cigar burns.” Create a new layer (CTRL+SHIFT+N) and name it “sketch”. Grab the Brush Tool (B)  and roughly sketch where the burnt areas should be.


Click the “lock” icon to lock this layer and make it uneditable. Grab the Move Tool (V) and CTRL-click the model to make it the current layer. Hit CTRL+J to duplicate the layer and set its Blending mode to “Multiply”.


Duplicate it again (CTRL+J), desaturate it (CTRL+SHIFT+U) and set its Blending mode to “Screen”. Select all these layers and hit CTRL+G to place them in a group. Name this group “model”.


With the layer group still selected, go to Layer > Layer Mask > Reveal All. Now Grab the Brush Tool (B), hit D and paint over the marked areas. We will tweak this after we add the cigar ash, so make a rough brushing.


Select the “ash” layer and duplicate it (CTRL+J) and make the copy visible. Hit CTRL+T to enter Free Transform mode and resize it. Place it like below.


Go to Layer > Layer Mask > Reveal All. Grab the Brush Tool (B) and paint over the extra areas. If you masked too much of the model, select the “model” layer group mask and paint over with white (Hit D, then X to set Foreground color to pure white).


Now the image will get complex, and we’ll have a ton of colors we could get influenced by. My strategy is to see everything in grayscale, so I can decide on the colors without any distractions.
Select the top-most layer and go to Layer > New Adjustment Layer > Black & White. Hit OK, then lock the layer.


Repeat STEPS 18-19 to create the other areas. This is entirely up to you, choose any areas you like. Make sure you place some large ash drops, it will show the time spent burning.


Let’s light it up! Create three new layers (CTRL+SHIFT+N) and place them above the “Black & White 1” adjustment layer. Name them “dark red”, “red” and “yellow”. Create a new layer and name it “palette”. Grab the Brush Tool (B) and paint these colors on it, and then lock it.


Select the “red” layer, grab the Brush Tool (B) and set the tip to a soft, round brush. Hit “1” to set its Opacity to 10% and paint soft red spots, as below. Hit “7” and paint stronger red spots on the interior and set the layer’s Blending mode to “Color Dodge”. To pick the color, hold the ALT key and click the red color from the “palette” layer).


Select the “yellow” layer and set its Blending mode to “Overlay”. Grab the Brush Tool (B), select a yellow color and draw small spots.


Select the “dark red” layer and use a darker red to increase the fire contrast. Set its Blending mode to “Multiply”.


It’s time to create some environmental lighting! Create two new layers (CTRL+SHIFT+N) and name them “body shadow” and “body light”. Place them in the “model” layer group and above all the layers in the group and ALT+click between the layers to create a clipping mask.


Set the “body shadow” layer’s Blending mode to “Multiply”. Now grab the Brush Tool (B), set the tip to a soft, round brush and a 40% Opacity, select a dark gray color and paint only the shadows near the ground.


Select the “body light” layer and set its Blending mode to “Soft Light”. Hit D, then X and use the Brush Tool again to paint the lights on the body.


Create a new layer and place it below the “model” layer group and above the “ash” layer (the one with the ash on the ground). Set its Blending mode to “Multiply” and use the Brush Tool to paint the shadows.
The ash also has a darker area of its own, so create some using the same technique in the areas shown below.

Here’s a neat trick! Use an opaque brush to draw the strong shadow and a faded brush to draw a soft shadow a bit further from the model.


The ash will also drop tiny shadows on the ground, and we need to paint that too. Create a new layer similar to the previous, but place it below the ash layer and paint small dark spots below the ashes.


Now we have a cool detailed illustration, but we also need a message to go along with it. I chose “Smoking kills. So why not quit?” text. When you want to send a message, don’t put fancy stuff on the font unless you want it to be a type treatment.

Grab the Horizontal Type Tool (T) and click-drag a type box. Type in “Smoking kills.” and set the font to “Bebas”. Make it large.


Repeat STEP 31, but make the font smaller and the “So why not quit?” text.

Why make it smaller, you ask? The answer is simple: the size difference creates a visual path and makes the text easy to read. Exploit this by putting the important text in the larger text box to attract attention.


In the Layers palette, click the “fx” button and select “Blending Options”. Use the “Drop Shadow”
setting shown below and hit OK. ALT+click-drag the “fx” icon to the other text layer to duplicate these settings.


Let’s add mood to the overall design! Select the top-most layer (the “yellow” layer) and go to Layer > New Adjustment Layer > Gradient Map. Click on the default gradient, set it like below and hit OK. Set its Blending mode to “Lighter Color”.


Turn off the visibility of “palette” and “sketch” layers. Select the “Gradient Map 1” layer, select the entire artwork (CTRL+A), copy merged (CTRL+SHIFT+C) and paste it (CTRL+V). Go to Filter > Other > High Pass. Use a 1.5 px setting and hit OK. Set its Blending mode to Overlay.


If you want, you can add some smoke using some stock brushes. You can download them from the link in the “resources” tab.

  smoking tut source (40.2 MiB, 12,351 hits)

Editor’s Note: This post was originally published in August 2011 and has been completely revamped and updated for accuracy and comprehensiveness.

(Visited 34,814 time, 1 visit today)

49 Comments How to Create an Anti-Smoking Ad Concept with Photoshop

  1. YORGOS Sep 1, 2011 at 17:38

    great great great

  2. MabZziCLe Sep 2, 2011 at 15:24

    Very useful tutorial… and one of the factors for that creativity is for drinking COFFEE :)

    1. Doink Sep 2, 2011 at 17:56

      Yes, it is. I went through quite a few concepts before ending up with this one. Also finding the right stocks was the hardest part.

  3. Rodrigo Sep 4, 2011 at 23:39

    Very good, i like the idea, I’ll come up with something similar, for good…!!!

  4. Pingback: How to Create an Anti-Smoking Ad Concept with Photoshop | Design News

  5. Pingback: 35 Fresh Impressive Photo Manipulation Tutorials | 1 step web design

  6. Pingback: 20+ Fresh Photo Effects Photoshop Tutorials | Tutorials Share | Tutorials, Resources & Tips for Designers!

  7. Pingback: 30个罕见的优秀Photoshop教程 | uedchina 专注于用户体验设计

  8. Intivar Jan 27, 2012 at 01:36

    Thanks – This blog is great! so glad i fount it!

  9. K Feb 19, 2012 at 18:19

    Lovely, probably totally ineffective as a stop smoking ad for people like me though, me would just have a good look at the poster while walking by, be subconsciously reminded of the fact we currently smoke then spark up another cigarette as we walk off thinking “that’s pretty damn good photo-manipulation going on there”.

  10. Pingback: 30个罕见的优秀Photoshop教程 | 莲娜用户体验研究日志 Lyna UED

  11. Ahmed Cheken Apr 7, 2012 at 18:47


  12. hom Apr 9, 2012 at 23:17

    you have done a great job, but some of the steps you did at the beginning don’t make any sense at the end.

  13. Pingback: Kumpulan Tutorial Photoshop | PSP Blog

  14. huyen Aug 2, 2012 at 06:07

    very nice

  15. Pingback: 30个罕见的值得收藏的Photoshop教程 | 我们爱网页设计

  16. Djoelchaedar Red'hot Chilly Pepers Oct 26, 2012 at 18:00


  17. Aqib ali Nov 8, 2012 at 13:13

    Hi there,

    its realy nice work but just wanna know if you have video tutorial for this. Can you send me the link if possible would be realy appriciate that.


    1. Doink Nov 23, 2012 at 13:07

      Unfortunately, I haven’t created a video of this and at this point, i can’t find the time to make one. But i can assist you with the steps. Just drop a comment and i’ll reply.

  18. Web Design Nov 10, 2012 at 07:41

    great …….great ……No words ! Really awesome

  19. Pingback: 40 great Manipulation Tutorials of All Time - |

  20. Pingback: 优设(UISDC)-优秀网页设计联盟-SDC-听讲座,聊设计,在这里

  21. Pingback: 30个值得收藏的PHOTOSHOP教程_平面设计-随意设计

  22. Pingback: Photo Manipulation Tutorials to Improve Your Photoshop Skills | universoart

  23. e liquid Jul 3, 2013 at 16:50

    Good post. I learn something new and challenging on blogs I stumbleupon every day. It will always be interesting to read articles from other writers and practice a little something from other websites.

  24. Pingback: Photoshop Tutorials Roundup July 2013 | PSD Box

  25. Pingback: 特典:2013酷炫PS教程大集合 | 站长学习网

Leave A Comment

Your email address will not be published.